Ryobi HG600, Operator'S Manual

Page: 7 / 32

7 - English
FEATURES
PRODUCT SPECIFICATIONS
Heat Output ........................................................................................................................................................ 200˚F-1050˚F
Input ..................................................................................................................................... 120 V, AC only, 60 Hz, 11 Amps
Net Weight ....................................................................................................................................................................1.7 lbs.
KNOW YOUR HEAT GUN
See Figure 1, page 11.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
HI/LO/OFF SWITCH
Your heat gun has a conveniently located on/off slide switch.
NOSE CONE
The nose cone on your heat gun can be removed for work
in confined spaces.
SUPPORT STAND
Your heat gun has a built-in support stand for ease of use
and convenient cool down.
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.

Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.

Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.

Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.

If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Heat Gun
Tube Bender Nozzle
Concentrator Nozzle
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this tool or create accessories
not recommended for use with this tool. Any such altera-
tion or modification is misuse and could result in a hazard-
ous condition leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
TEMPERATURE ADJUSTMENT DIAL
The temperature of your heat gun can be adjusted from
200ºF to 1050ºF by rotating the temperature adjustment dial.
TEMPERATURE DISPLAY
The desired temperature is indicated by the position of the
temperature adjustment dial.
THERMAL PROTECTION
The heat gun is equipped with thermal protection that
deactivates the heating coil when the nozzle is too close
to a surface being heated. The fan will continue to operate
and the heating coil will automatically activate after the coil
has cooled down.