8
WARNING
To avoid accidents always disconnect the
tool from the power supply before cleaning
or performing any maintenance. The tool
may be cleaned most effectively with
compressed dry air. Always wear safety
goggles when cleaning tools with
compressed air.
MAINTENANCE
BEARINGS
■
After 300-400 hours of operation, or at every
second brush change, the bearings should be
replaced by an authorised RYOBI service
centre.
■
Bearings which become noisy (due to heavy
load or very abrasive material cutting) should be
replaced at once to avoid overheating or motor
failure.
CLEANING
■
Ventilation openings and switch levers must be
kept clean and free of foreign matter. Do not
attempt to clean by inserting pointed objects
through openings.
CAUTION
Certain cleaning agents and solvents
damage plastic parts. Some of these are:
gasoline, carbon tetrachloride, chlorinated
cleaning solvents, ammonia and household
detergents that contain ammonia.
Now that you have purchased your tool, should a
need ever exist for repair parts or service, simply
contact your nearest Ryobi Authorised Service
Centre or other qualified service organisation. Be
sure to provide all pertinent facts when you call or
visit.
SERVICE
