2
English
OPERATION
WARNING
Always wear safety goggles or safety glasses
with side shields when operating products.
Failure to do so could result in objects being
thrown into your eyes, resulting in possible
serious injury.
WARNING
Do not use any attachments or accessories
not recommended by the manufacturer of this
product. The use of attachments or accessories
not recommended can result in serious personal
injury.
APPLICATIONS
You may use this product for the following purposes:
n
Charging compatible Ryobi 18 volt battery packs
CAUTION
If at any point during the charging process none
of the LEDs are lit, remove the battery pack
from the charger to avoid damaging the product.
DO NOT insert another battery. Return the
charger and battery to your nearest service
center for service or replacement.
CAUTION
Charge in a well ventilated area. Do not block
charger vents. Keep them clear to allow proper
ventilation.
BATTERY PROTECTION FEATURES
Ryobi One+ 18 V lithium-ion batteries are designed with
features that protect the lithium-ion cells and maximize
battery life.
If the tool stops during use, release the trigger to reset
and resume operation. If the tool still does not work, the
battery needs to be recharged.
BATTERY GAUGE (Fig. 2)
To display the amount of charge left in the battery, press
and hold the battery gauge button.
n
If the charge indicator light glows green, the battery
pack is fully charged.
n
If it glows yellow, it has a usable charge remaining but
will soon require recharging.
n
If it glows red, the battery requires recharging as
indicated by the battery gauge symbols on top of the
battery.
Note:
The LED charge indicator light will not work if
the battery protection feature has caused the battery
pack to stop powering the tool. When the battery pack
resets itself, the LED will again function.
LED FUNCTIONS OF CHARGER (Fig. 3-4)
CHARGER LED WILL BE ON TO INDICATE STATUS
OF CHARGER AND BATTERY PACK:
n
Red LED on, Green LED off = Power to charger is on.
n
Red LED flashing, Green LED off = Battery is being
tested.
n
Red LED flashing, Green LED flashing = Battery is
defective.
n
Red LED on, Green LED flashing = Battery is
charging.
n
Red LED off, Green LED on = Battery is fully
charged.
CHARGING THE BATTERY PACK
Use only these Ryobi One+ 18 V battery packs with
this charger.
Battery packs for this tool are shipped in a low charge
condition to prevent possible problems. Therefore,
you should charge them until the green LED on the front
of the charger comes on.
Note:
The charger will also charge Ryobi One+ 18 V
Ni-Cd battery packs.
CHARGING A COOL BATTERY PACK
If the charger does not charge the battery pack under
normal circumstances, return both the battery pack and
charger to your nearest Authorized Service Center for
electrical check.
n
Charge the battery pack only with the charger
provided.
n
Make sure the power supply is normal household
voltage,
240V, 50Hz, AC
only.
n
Make sure the latches on each side of the battery
pack snap into place and the battery pack is secured
in the charger before beginning operation.
n
Connect the charger to the power supply.
n
Place the battery pack in the charger aligning raised
rib on the battery pack with the groove in the charger.
260111130 manual (SAA).indd Sec1:2
260111130 manual (SAA).indd Sec1:2
1/2/08 10:51:55 AM
1/2/08 10:51:55 AM
