background image

1

English

SAFETY INSTRUCTIONS

 

CAUTION

 When using the battery charger, the following 

basic safety precautions should be observed for 
protection against electric shock, danger of injury 
and burns.

Please read and observe these instructions before using 
the device.

n

  

Before using the device check that the mains cable 
and mains plug are not damaged.

n

  

The device must not be damp, neither should it be 
used in a damp environment.

n

  

Do not use the device if it has suffered any heavy 
shock or jolting, or is damaged in any other way.

n

  

Due to the heat generated during charging, 
the battery charger should not be operated on a 
combustible surface/in an inflammable environment.

n

  

Do not cover the ventilating slits

n

  

Never disassemble the device yourself. Danger of 
an electric shock or fire could be caused by improper 
reassembly.

n

  

Pull the plug of the battery charger out of the socket 
when it is not in use or when cleaning it.

n

  

Only use extension cable that is approved and 
technically in perfect condition.

n

  

During operation provide sufficient ventilation. 
Malfunction during charging can be caused by storing 
and operating in places where the temperature 
e40°C; this should be avoided. Battery 
charging in closed cupboards, near heat sources 
(radiators, bright sunshine) etc. causes heat to 
accumulate and can damage the device.

n

  

If the battery is not going to be used for a longer 
period, pull the battery off the battery charger and pull 
out the mains plug.

n

  

Protect battery contact to avoid a short circuit caused 
by metallic object that can cause a fire or explosion!

n

  

Do not rivet or screw any name-plates or signs onto 
the device. The protective insulation can thereby 
be rendered ineffective. Adhesive labels are 
recommended.

n

  

Only charge original recommended batteries.

n

  

If the power cord is damaged, it must be replaced by an 
Authorised Service Center in order to avoid a hazard.

 

WARNING

 D o   n o t   r e c h a r g e   p r i m a r y   c e l l s   ( n o n -

rechargeable).

 

Damage to property/material

 Mains voltage must correspond with the voltage 

specifications on the device.

n

  

This appliance is not intended for use by persons 
(including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance 
by a person responsible for their safety. Children 
should be supervised to ensure that they do not 
play with the appliance.

n

   Th

i

s  appl

i

ance 

i

s not 

i

ntended for use by youn

g

 

ch

i

ldren or 

i

nfi rm persons unless  they have been 

adequately superv

i

sed by a respons

i

ble person to 

ensure that  they do not play w

i

th the appl

i

ance

.

n

  

Keep children and visitors away.

  V

i

s

i

tors should 

wear safety 

g

lasses and be kept a safe d

i

stance from 

work area

.

 Do not let v

i

s

i

tors contact tool or extens

i

on 

cord

.

n

  

Complies with AS/NZS 60335.

ASSEMBLY

No assembly required on this product.

SPECIFICATIONS

Battery  

Voltage  Charger  

Battery   No. of cell 

Pack  

 

Input  

Capacity  for battery

130247015

   18 V    240V, 50Hz,  1.7 Ah 

15

  

AC 

only

130501002

   18 V   240V, 

50Hz, 2.4 

Ah 

10

  

AC 

only

OPERATION

 

WARNING

 Do not allow familiarity with products to make 

you careless. Remember that a careless fraction 
of a second is sufficient to inflict serious injury.

260111130 manual (SAA).indd   Sec1:1

260111130 manual (SAA).indd   Sec1:1

1/2/08   10:51:53 AM

1/2/08   10:51:53 AM

Summary of Contents for BCL-1800








Reviews: