background image

2

not be used for a while, it is best to leave drain valve 

open until such time as it is to be used. This will allow 

moisture to completely drain out and help prevent 

corrosion on the inside of tank.

 

Risk of fire or explosion. Do not spray flammable liquid 

in a confined area. Spray area must be well ventilated. 

Do not smoke while spraying or spray where spark or 

flame is present. Keep compressors as far from the 

spraying area as possible, at least 10 m (33 feet) from 

the spraying area and all explosive vapors.

 

Risk of bursting. Do not adjust regulator to result 

in output pressure greater than marked maximum 

pressure of attachment. Do not use at pressure 

greater than 8 bar.

 

If connected to a circuit protected by fuses, use time 

delay fuses with this product.

 

To reduce the risk of electric shock, do not expose to 

rain. Store indoors.

 

Inspect tank yearly for rust, pin holes, or other 

imperfections that could cause it to become unsafe.

 

Never weld or drill holes in the air tank.

 

Make sure the hose is free of obstructions or snags. 

Entangled or snarled hoses can cause loss of balance 

or footing and may become damaged.

 

Use the air compressor only for its intended use. Do 

not alter or modify the unit from the original design or 

function.

 

Always be aware that misuse and improper handling 

of this product can cause injury to yourself and others. 

 

Never leave a tool unattended with the air hose 

attached.

 

Never point any air tool toward yourself or others.

 

Do not operate this air compressor if it does not 

contain a legible warning label.

 

Do not continue to use a tool or hose that leaks air or 

does not function properly.

 

Always disconnect the air supply and power supply 

before making adjustments, servicing a product, or 

when a product is not in use.

 

Do not attempt to pull or carry the air compressor by 

the hose.

 

Your tool may require more air consumption than this 

air compressor is capable of providing.

 

Always follow all safety rules recommended by the 

manufacturer of your air tool, in addition to all safety 

rules for the air compressor. Following this rule will 

reduce the risk of serious personal injury.

 

Never direct a jet of compressed air toward people or 

animals. Take care not to blow dust and dirt towards 

yourself or others. Following this rule will reduce the 

risk of serious injury.

 

Do not use this air compressor to spray chemicals. 

Your lungs can be damaged by inhaling toxic fumes. 

A respirator may be necessary in dusty environments 

or when spraying paint. Do not carry while painting.

 

Inspect product cords and hoses periodically and, 

if damaged, have them repaired at your nearest 

authorised service center. Constantly stay aware of 

cord location. Following this rule will reduce the risk of 

electric shock or fire.

 

Never use an electrical adaptor with this grounded 

plug.

 

Check for damaged parts. Before further use of the 

air compressor or air tool, a guard or other part that 

is damaged should be carefully checked to determine 

that it will operate properly and perform its intended 

function. Check for alignment of moving parts, binding 

of moving parts, breakage of parts, mounting, and 

any other conditions that may affect its operation. A 

guard or other part that is damaged should be properly 

repaired or replaced by an authorized service center. 

Following this rule will reduce the risk of serious injury.

 

Never store a tool with an air line connected. Storing 

the tool while connected to an air supply can result 

in unexpected operation, firing or movement and 

possible serious personal injury.

 

Protect your lungs. Wear a face or dust mask if the 

operation is dusty. Following this rule will reduce the 

risk of serious personal injury.

 

If the power supply cord is damaged, it must be 

replaced only by the manufacturer or by an authorised 

service centre to avoid risk.

 

Save these instructions. Refer to them frequently and 

use them to instruct others who may use this product. 

If you loan someone this product, loan them these 

instructions also.

 

the machine shall be connected to a circuit 

protection device (fuse or circuit breaker).

 

Operate the machine from the front of the control 

panel.

 

When the machine is in operation, many parts 

of machine may cause a high temperature. Use 

necessary personal protection equipment such 

as gloves to avoid injuries resulting from a high 

temperature.

 

this machine is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and 

knowledge. children should be supervised to 

ensure that they do not play with the machine.

Summary of Contents for Airwave RA-C2550-G




















Reviews: