![background image](http://html.mh-extra.com/html/ryobi/3000223/3000223_user-manual_1504349006.webp)
1
English
GB
FR
DE
ES
IT
NL
PT
DK
SE
FI
NO
RU
PL
CZ
HU
RO
LV
LT
EE
HR
SI
SK
GR
TR
DESCRIPTION
1. Keyless
chuck
2. Switch
trigger
3. Bit
storage
4. Rotation selector (forward/reverse)
5. Torque adjustment ring
6. Depress
latches
7. Battery
pack
8. Reverse
9. Forward
10. Unlock (release)
11. Chuck jaws
12. Lock (tighten)
13. Drill bit
14. To decrease torque
15. To increase torque
16. Two-speed gear switch
17. High speed
18. Low speed
SPECIAL SAFETY RULES
Wear ear protectors.
Exposure to noise can cause
hearing loss.
Hold tool by insulated gripping surfaces when
performing an operation where the cutting tool
may contact hidden wiring or its cord.
Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
SPECIFICATIONS
Voltage
12 V
Chuck
0.8-10 mm
Switch
Variable speed
No-load speed (drill mode)
Low speed
0 - 400 min-1
High speed
0 - 1380 min-1
Maximum torque
25 Nm
Weight (not including battery pack)
1.01 kg
Model
Battery pack
(not included)
Compatible charger
(not included)
LSDT1202
BPL1220
BPN1213
C120D
BPN1213
C120N
OPERATION
WARNING
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a
¡¢£ ¤¤ ¥ ¤¦ ¡ §¡¦¨©
WARNING
Always wear eye protection marked to comply with
ANSI Z87.1. Failure to do so could result in objects
being thrown into your eyes, resulting in possible
serious injury.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
¬
Drilling in all types of wood products (lumber,
plywood, paneling, composition board, and hard
board)
¬
Drilling in ceramics, plastics, fiberglass, and
laminates
¬
Drilling in metals
For complete charging instructions, refer to the Operator’s
Manual for the battery packs and chargers listed in the
£®¤ ¤ ©
BATTERY PROTECTION FEATURES
Ryobi lithium-ion batteries are designed with features
that protect the lithium-ion cells and maximize battery life.
Under some operating conditions, these built-in features
may cause the battery and the tool it is powering to act
differently from nickel-cadmium batteries.
During some applications, the battery electronics may
signal the battery to shut down, and cause the tool to stop
running. To reset the battery and tool, release the trigger
and resume normal operation.