![background image](http://html1.mh-extra.com/html/ryobi/0339587/0339587_manual_1506865012.webp)
PRODUCT SPECIFICATIONS
Cordless hedge trimmer
Model
OHT1800P
Rated voltage
18 V d.c.
No-load speed
1300/min ±10%
Blade length
40 cm
Cutting capacity
14 mm
Vibration level (in accordance with EN 62841-1:2015 and EN 62841-
4-2:2019)
Front handle
1.7 m/s
2
Rear handle
1.3 m/s
2
Uncertainty of measurement
1.5 m/s
2
Noise emission level (in accordance with EN 62841-1:2015 and EN
62841-4-2:2019)
A-weighted sound pressure level
84.2 dB(A)
Uncertainty of measurement
1.8 dB
A-weighted sound power level
92.2 dB(A)
Uncertainty of measurement
1.8 dB
Weight without battery pack
1.5 kg
Maximum weight
2.7 kg
BATTERY AND CHARGER
Model
RHT18X20P
OHT1800P
Battery pack
RB1820C
-
Weight
0.43 kg
-
Charger
RC18115
-
Weight
0.35 kg
-
Compatible
battery packs
RB18L13, RB18L13Z, RB18L15, RB18L15A,
RBL18L15B, RB1815C, RB18L20, RB18L20A,
RB18L25, RBL18L25A, RB1825C, RBL18L26,
RB18L30, RB18L30A, RB18L40, RB18L40A,
RB1840C, RB1840X, RB18L50, RB18L50A,
RB1850C, RB1850X, RB18L60, RB18L60A,
RB1860X, RB18L90, RB18L90A, RB1820C
Compatible
chargers
BCL14181H, BCL14183H, BCS618, RC18627,
BCL1418IV, RC18150U, RC18150, RC18150U,
RC18627U, RC18120, RC18115, RC18118C
NOTE:
Visit your local special orders desk or contact RYOBI
customer service for replacement parts.
WARNING!
The declared vibration total values and the
declared noise emission values given in this instruction
manual have been measured in accordance with a
standardised test and may be used to compare one tool with
another. They may be used for a preliminary assessment
of exposure.
The declared vibration and noise emission values represent
the main applications of the tool. However, if the tool is used
for different applications, used with different accessories,
or poorly maintained, the vibration and noise emission
may differ. These conditions may significantly increase the
exposure levels over the total working period. An estimation
of the level of exposure to vibration and noise should take
into account the times when the tool is turned off or when it
is running idle. These conditions may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in
case of vibration), and organising work patterns.