3.5.4
FRONT SHIELD
The adjustable covering shield is used during work without a collection tank or during the use of
aeration rollers, in order to prevent the flying off of swept material. The shield is set into the guiding
bars in front of the brush, by the joints welded on to the shield’s frame.
3.5.5
COLLECTING BIN
A collecting bin fixed in front of the sweeping brush is used for gathering the swept material.
It is mounted in front of the sweeping brush into guide poles. Before emptying the collecting
bin the engine must be switched off. Empty the bin by pulling the handle upwards. Do not
reverse with the collecting bin in a working position and do not lift together with the brush!!!
3.5.6
ROTATING THE BRUSH
The sweeping brush can be rotated by moving the rotating lever into one of the three available
positions. When sweeping towards the left or right, we do not recommend using the collecting bin.
The brush can be rotated by moving the lever down, and then by puling or pushing the front frame of
the sweeping brush.
3.5.7
SUPPORTING WHEELS
The supporting wheels /left and right / are to be attached on the side of the brush's frame.
4. CLEANIING
After each working session remove the dirt from the brushes and using water stream clean the imide of
the collecting bin. Stabilize the machine on a supporting stang before hanging out the brushes to avoid
their deformation. Whenever work was carried out in dusty environment clean the engine´s air filter.
Change the filter only if the old one cannot by cleaned. Operation and maintenance of the engine are
described in the manual for the engine unit.
.
Summary of Contents for MK 110
Page 23: ......
