INTRODUCTION
Carl Zeiss
Notes on instrument safety
Axio Lab.A1
8 430037-7144-001
04/2013
Should it be determined that protective measures are no longer effective, the instrument must
be taken out of service and secured against unintended use. Please contact a Zeiss service
agency or the Carl Zeiss Microscopy Service to repair the instrument.
Axio Lab.A1 microscopes are equipped with a power supply unit incorporated in the stand,
which allows line voltages ranging from 100 V to 240 V ±10 % (50/60 Hz) to be used without
requiring any change of voltage on the unit.
Always pull the mains plug before opening the instrument or replacing a fuse!
Only fuses for the rated power may be used. The use of provisional fuses or short-circuiting the
fuse-holder is prohibited.
Axio Lab.A1 microscopes are not equipped with any special devices for protection from
substances that are corrosive, potentially infectious, toxic, radioactive, or other substances that
could be hazardous to health. Make sure to observe all legal regulations, particularly the
relevant national accident prevention regulations when handling such substances.
Dirt and dust may impair the performance of the instrument. Therefore, the instrument must be
protected from these influences as far as possible and covered with the dust cap when not in
use. Always check whether the instrument is switched off before you cover it.
Obstruction or covering of ventilation slits may result in heat build-up which may damage the
instrument and in extreme cases cause fire. Always keep the ventilation slits clear and ensure
that no objects enter the instrument through the ventilation slits.
Instruments may only be operated by trained personnel. The latter must be aware of the
possible hazards involved with microscopy and the respective application. Axio Lab.A1
microscopes are high-precision instruments whose functional capabilities may be impaired or
destroyed when handled improperly.
Instruments should not be operated in an explosive environment.
Instruments should only be operated on a solid, non-combustible surface.