4-Operation Instruction
4.1 Initial start
The incubator will be start up only while it was installed completed with the
power and gas supply properly connected, and the humidity pan filled with water.
Press power switch to start the equipment and enter the main operation interface as
shown below.
The parameter display area on main interface includes: TEMP (temperature),
CO
2
(CO
2
concentration), PCO
2
(CO
2
pressure), and RH (relative humidity);
Functional area include: keys of [Silence], [Sterilize] and [Menu].
4.2 Menu
Click the [Menu] to the interface below. It mainly includes: Para SET, Alarm Set,
General, Sterilize, Trend, Alarm log, Event, Calibration, and other operations.
