Care and Cleaning
- 3 -
661851-001
Foot and Shoe Connector
•
Before engaging the high-def connector, verify that the pins and sockets of the male
and female connectors are free from sand and other foreign material.
•
Blow dust particles from the connector with clean, dry compressed air. This inspection
will help prevent electrical shorting and damage to the connectors.
•
Before engaging the foot in the shoe, apply a liberal amount of dielectric grease (RV
P/N 380085) to the pins and sockets of the high-def connectors.
•
Regularly apply a light amount of dielectric grease to the tapered areas of the foot and
shoe.
MIL SPEC Connector
•
Verify that the pins and sockets areas free from sand and any other foreign material.
Blow with compressed air as needed.
•
Apply a liberal amount of dielectric grease (RV P/N 380085) to the pins and sockets of
the mil-spec connectors.
•
Connect the connectors. Verify that the twist lock ring engages properly with the three
lock pins. Do not use tools to tighten.
Summary of Contents for Thermal FFV
