Rvision Thermal FFV, Operation Manual

Page: 24 / 61

Look 6.5™
- 8 - 661844-001
Preset Touring
Touring mode automatically moves the camera through the preset positions you have defined.
There are two ways to use touring mode:
•
Tour between presets 0 and 1 without displaying the presets menu by pressing the
Function 1 and Function 2 keys at the same time.
•
Tour between presets 0 and any number you select up to 99 *(when legacy mod is off).
To do this:
o
Press F1 or F2 for more than three seconds.
The preset number is displayed.
o
Set the last preset number in the tour by pressing HI to increase the last preset
number and LO to decrease the last preset number until the desired number is
displayed.
• Press F1 and F2 to start tour.
•
To adjust the time interval at which the camera moves between preset positions in
touring mode use the Gear UP key to increase the interval and Gear DN key to decrease
the interval.
•
To stop a tour. Move the joystick in any direction to end the tour.