RVE MK68000, Instruction Manual, Page: 9 / 37

-8-
Step 1-4
1-5
No.
1
2
3
Qty Parts Description
零件名称
1-4 尾传动大齿轮
1-5 主齿轮
杯头内六角螺丝 M2.5x6
尾皮带主齿轮挡边
尾皮带主齿轮挡边
尾皮带主齿轮88T
尾皮带主齿轮 88T
单向轴承垫片
单向轴承座
单向轴承
主齿轮96T
杯头内六角螺丝 M3x8
2
1
8
Tail Drive Gear Cover
Tail Drive Gear, 88T
Tail Drive Gear & Main Gear Set assembly
Tail Drive Gear assembly
尾传动齿轮及主齿轮组裝
8X
5X
尾皮带主齿轮边盖各有四个2.5mm螺纹和四
个2.5mm孔位。请将齿轮边盖错位装配，将
螺丝穿过孔位锁入对边的螺纹。
The tail drive gear cover has four M2.5mm
threads and four 2.5 mm holes, please
offset the covers to align a hole from one
cover with the thread from the other.
单向轴承出厂已经组装完毕，无需拆开重新组
装。如更换单向轴承，安装时请在轴承外壳适
当涂抹轴承胶。
Apply a little green bearing glue to the outer
wall of the One-way bearing during installation.
Main Gear Set Assembly
No.
1
2
3
4
5
Qty Parts Description
零件名称
杯头内六角螺丝
M2.5x6
主齿轮 96T
单向轴承座
单向轴承
单向轴承垫片
杯头内六角螺丝
M3x8
1
1
2
1
5
Socket Screw, M3x8
Socket Screw, M2.5x6
Main Gear, 96T
One Way Clutch Housing
One Way Clutch Bearing
One Way Clutch Washer
主齿轮的φ3孔请务必对准单向轴承座的螺丝孔，依照图示对角依序适度拧紧螺
丝，切勿大力紧固，否则可能滑牙。
The 3mm hole of the main gear must be aligned with the screw hole of the
one-way bearing housing. As shown in the figure tighten the screws in order
diagonally, and do not over tighten the screws.
长
短
Longer
Shorter