RVE MK68000, Instruction Manual, Page: 24 / 37

-23-
Step 5-3
No.
1
2
3
4
5
6
Qty Parts Description
零件名称
尾拉杆
尾拉杆接头
丝杆M2.3x20
球头扣
半圆头内六角自攻螺丝M2.6x10
半圆头内六角自攻螺丝M2.6x10
尾拉杆导向环
尾拉杆导向环
尾拉杆组
尾拉杆接头与碳纤拉杆之间需 要用AB胶粘合。请先用砂纸打磨
碳纤管粘接位置，增大粘接强度。
≈720mm
Tail Pitch Control Likage assembly
尾拉杆
尾拉杆接头
丝杆2.3x20
球头扣
5-3 尾舵拉杆组 Tail Pitch Control Likage assembly
尾舵拉杆组组裝
Tail Pitch Linkage Connector
Tail Pitch Carbon Linkage Rod
Rod Guide
Rod Linkage Screw
Ball Link
Button Phillips Tapping Screw M2.6x10
2
1
2
1
2
1
PA
The adhesive between the tail pitch linkage connector and the
carbon linkage rod needs to be bonded with epoxy. Please use
sandpaper to polish the bonding position of carbon linkage rod
to increase the bonding strength.
尾拉杆在
5-5
零件包内。
Tail Pitch Carbon Linkage Rod in the Bag 5-5.
≈735mm
尾舵机安装方向，会影响尾拉杆设定长度。请
参考图示进行拉杆长度调整！
在固定粘接尾舵
拉杆前，请根据您所使用的尾舵机型号，并实
际量测尾拉杆长度后，再进行粘接固定。
The installation direction of the tail servo will
affect the set length of the tail rod.
Please refer to the figure below to adjust the
length of the tail rod!
Before fixing and bonding the rudder tail rod,
Please determine the length of the tail rod
according to the rudder servo you are using.
A B