RVE MK68000 Instruction Manual Download Page 3

-2-

INTRODUCTION / 

简介

Thank you for purchasing the RVE RC radio control helicopter. This new helicopter is the latest innovation by 

RVE RC.  It has the perfect combination of flying stability and the agility for F3C flying.  This helicopter is an 

excellent choice for flying enthusiasts like you.  For convenient assembly and   safe operation of the helicopter, 

please read the instructions carefully.  Retain the user manual in case you need it for any information or reference.

CAUTION / 

警告

1. R/C models are not toys.  This product is a high-precision flying machine. Possibilities of unexpected 

crashes may occur due to electronic interference,  incorrect operation, or poor mechanical maintenance. 

Although it is a R/C model helicopter, the rotor blades rotate at high speeds, which may cause serious 

damage, injury, or death if the model hits people or property. Therefore, extreme  caution must be 

exercised during operation.

2. RVE RC ensures parts packaged in this product is of the highest quality. However, after assembly 

and usage, parts damaged due to wear or misuse will not be replaced under any circumstances. If you 

have any questions regarding    its operation and repair, RVE RC service agents are able to 

provide free technical guidance.

3. This product is only recommended for users ages 16 and up. Because flying a R/C helicopter is difficult, 

beginners must receive guidance and supervision from experienced pilots to minimize unexpected danger.  

Practice in spacious areas, far away from obstacles such as buildings, trees, electrical towers, or crowds.

4. To decrease the cost of repair and maintenance for beginners, it is recommended  to fly the helicopter 

with a practice rack and to learn basic flying skills with a computer R/C flying simulator. (Crashes in 

simulators are free to repair!)

1.本项遥控直升机产品并不是玩具,它是一项结构精密、高专业度模型产品,如未经正确组装与操控,将可能对
  操控者或其他人造成身体伤害。使用者必须了解,若未确实进行飞行前安全检查或操控不当而造成人员受伤或
  物体损坏,使用者必须负起法律责任。
2.本产品由高品质零组件组成,RVERC对于安装过程、使用过后..等人为因素造成损坏事件不负赔偿之责。
  如您需要本产品相关组装、调整或其他协助,可与威翼各地经销商联系。
3.本项产品禁止十六岁以下青少年与孩童使用。强烈建议初学者应取得技术支援后再进行飞行,以避免危险发生。
  请于空旷地区操控本产品,并避免于建筑物、树木、电塔..等障碍物区域飞行。
4.建议初学者可安装练习架或透过电脑模拟软体练习,可达到实际练习效果与符合经济效益。

AMA INFORMATION / 

特别注意事项

Operating a model helicopter requires a high degree of responsibility and skill.  If you are a newcomer to the 

hobby, it is best to seek help and guidance from accomplished model helicopter pilots.  This will greatly 

speed up the learning process and have you flying successfully in a reasonable amount of  time. We also 

would strongly urge you to join the Academy of Model Aeronautics, if you are in States.  The AMA is a 

non-profit organization that provides its members with a liability insurance plan as well as monthly magazine 

entitled Model Aviation.  All AMA charter aircraft clubs require all pilots to hold a current AMA sporting 

license prior to operation of their models at club fields.  For further information, contact the AMA at:

Academy of Model Aeronautics

5151 East Memorial Drive

Muncie, IN 47302

(317) 287-1256

http://www.modelaircraft.org

操控遥控直升机对于飞行安全要求极高,需要高度的负责任态度配合,以及较高的操控技巧。如果您是一位初学者,
建议您必须向当地专业模型经销商,或是遥控直升机相关组织以及经验丰富的玩家寻求相关协助,以获得您所需要的

讯息以及专业知识。如此可有效协助您缩短学习的时间,更容易学会遥控直升机的组装、设定与操控技巧。
同时我们也强烈建议您加入中国航空运动协会会员,以合法合规的参与航空模型飞行运动。
如何参加中国航空运动协会,请参考以下网址了解详情:www.asfc.org.cn 

感谢您购买威翼遥控直升机产品,本项产品为威翼全新开发机种,兼具高控制精度与F3C飞行特性,是热衷遥控直
升机的您不可错过的选择。请于使用本产品前详尽阅读使用手册,以利于组装工作顺畅进行与安全操控本产品。
请妥善保存使用说明书,以利后续调整与维修参考用途。

Summary of Contents for MK68000






































Reviews: