IU 683 / 0404
17
TowerFeed
TM
for Brother Printers
APPENDIX B - Tips & Hints
Printing a Document with copies on the Brother Laser Printer with TowerFeed
When printing a document you get either an original copy (copies = 1), or, if you set copies = n, you will get n times
the same printout. Usually you want the original document to distinguish from its copies. An elegant method for that
purpose is to print the copies on different (color) paper. This can be done by sending the print job several times to
the printer but with different page settings. Using a Macro makes this an easy task.
On the next page you find an example of a macro used with a Word document. The macro starts with 'Sub Makro'
and ends with 'End Sub'. It consists of several modules (one per copy) which contain the paper definitions for each
copy (FirstPageTray = xx; OtherPagesTray = yy).
You can use the Macro Recording function of Word (Extra-Macro-Record) to produce the first module by
performing the steps for Page Setup and Print. Then, in Macro Edit mode, you copy/paste this module to have one
for each copy to print (one module per copy). Finally you edit the entries in FirstPageTray = xx; OtherPagesTray =
yy to the desired paper sources.
This will produce a macro, which prints the document in multiple copies and with the respective page settings.
Such a macro can be incorporated into a Menu item or added as icon into the Toolbar.
Hint: When creating and adding a Macro to the Toolbar for automatic printing of the final document with its copies,
it might be useful to also create and add a second Macro for easy printing of document drafts on cheap paper.
