IU 688 / 0402
6
TowerFeed
TM
for the HP color LaserJet 4650
INSTALLATION
Warning
:
TowerFeed may weigh up to 60 kilograms (130 pounds) depending on configuration. To prevent back
strain or injury, enlist the help of someone and bend your knees when lifting the unit.
Warning
:
POWER OFF your printer and TowerFeed and disconnect all power and interface cables before you
proceed with the installation.
Hardware Installation
Remove Transportation Inserts
•
Pull out, lift upwards and remove the trays from TowerFeed
so as to remove the transportation inserts (Fig. 7). There are
two at each side (keep the inserts for reshipment).
Note: The top tray is a turn round tray and does therefore
not store any paper
•
Re-insert and close the trays.
Note:
Located on the right side of each tray you will find coding pins for the paper size. They are set by the
factory and must not be changed.
Fig. 7
Removing Transportation Inserts
