IU 688 / 0402
5
TowerFeed
TM
for the HP color LaserJet 4650
UNPACKING
Note:
Prior to delivery your TowerFeed was thoroughly tested and
care-fully packaged. Please check your unit for transportation
damage and/or missing parts immediately upon receipt.
It is advisable to get a second person to help you unpack the unit.
Warning:
TowerFeed weighs up to 60 kilograms (130 pounds) depending
on configuration. Enlist the help of a second person to lift and
place the printer. To prevent back strain or injury, bend your
knees when lifting the unit.
Unpacking the TowerFeed unit
•
Cut the packing strips and remove the top of the shipping container.
•
Remove the two blue shock absorbers and the accessories box
from the top of the unit (Fig. 3)
.
•
If TowerFeed is delivered with the optional stand for the 4-tray unit,
remove the stand that is packed in front of TowerFeed (Fig. 4).
•
Enlist the help of another person and carefully lift TowerFeed out of
the container (Fig. 4).
•
Remove the stretched plastic from TowerFeed. Be careful to not
scratch the unit when using a cutting tool.
•
Insert the 4 rollers (from the accessories box) with some force onto
the roller shafts of TowerFeed. They will snap into position with a
noticeable click. Insert the 2 stoppable rollers on the front side and
the 2 non-stoppable ones on the back side of the unit (Fig. 6).
Note:
When turning TowerFeed over on a side or its back, be careful
to not scratch its housing. Use a piece of cardboard or the like
to prevent the unit from scratches.
•
Remove the transportation inserts in the TowerFeed trays (as de-
scribed in INSTALLATION)
Important:
It is recommended to keep the packaging material and inserts
for proper protection of the unit and its parts in case of
reshipment.
