19
RJ45 Connections
The CAT-5 T568A wiring standard is used for all
RJ45 terminations. This includes the RJ45 CAT-5
patch cable and the RJ45 wall plate connections.
Note:
CAT-5 connections within the housing are
secured at the factory and do not need to be
adjusted. If it seems necessary to examine the
interior CAT-5 connections, contact Russound
Tech Support for instructions.
Bottom of UNO-TS2D showing strain
relief in place
Bottom of UNO-TS2D showing strain
relief removed and RJ45 connection
exposed
INSTALLER GUIDE
UNO-TS2D RJ45 Connections
Female RJ45 Connection
At the back of the UNO-TS2D body is the female
RJ45 connector. This is hidden behind a strain
relief plate. The plate must be removed to con-
nect the CAT-5 cable with RJ45 connector and
replaced to hold the cable in place.
To remove the strain relief, use a screwdriver to
remove the screws.
Connect the CAT-5 cable with RJ45 connector
into the female RJ45 connector.
Replace the strain relief over the connected
cable, making sure the cable is not pinched.
Replace the screws on the strain relief.
To connect the UNO-TS2D to the
CAV6.6/CAM6.6 system, insert the free end of
the CAT-5 patch cable to an RJ45 wall plate
located near the touchscreen location.