26
INSTALLER GUIDE
Other Installer Setup Functions
Firmware Update
There may be future updates to the UNO-TS2D
firmware and screens. Updates will be available
online through the Document Center at
www.russound.com, under RNET Systems. Before
starting the update procedure, download updates
to a PC and connect the Programming Cable
(P/N 2500-121036) from the PC to the OS update
port on the front of the UNO-TS2D.
The Firmware Update page is reached from the
Installers Setup screen. When ready, press the
“Update my software” button to start the update
process. The controller must be power cycled
after the firmware has been updated. If multiple
screens are being updated, power cycle after all
have been updated.
This screen is shown when
“Firmware Update” is selected
Russound Information
This screen is shown when
“Russound” is pressed on the
Installers Setup screen
Russound Information
The Russound Information page is accessed by
pressing on the Russound logo on the Installers
Setup screen. You can also press the “UNO” logo
on the touchscreen Home screen.
The screen shows the Russound phone number
and web address.
This screen can also be used as a “cleaning”
screen, as nearly all its inactive surface can be
firmly wiped without initiating any control actions.
OS UPDATE PORT - For programming cable
connection
RESET BUTTON - Resets UNO-TS2D after
updates
1
2
UNO-TS2D without front cover
1
2
Firmware Update
