EVERYDAY USE
With normal use your electric blanket will require 20 minutes of
pre-heating on the maximum setting before bed time. We recommend that you
tum the blanket off when sleeping.
For normal use select the desired heat on the controller.
WARNING Do NOT sleep with the controller set to HIGH. Use the HIGH setting
only to pre-heat the bed, then reduce the heat setting to MEDIUM or LOW. Set to
OFF when the heat is no longer required. Remember to switch the blanket off at
the end of use.
It is recommended that this blanket is used with a residual current safety device
(safety switch) with a rated residual operating current not exceeding 30 mA.
This blanket is not to be used by young children unless the controls have been
pre-set by a parent or guardian or unless the child has been adequately instructed
on how to operate the controls safely.
CONTROLS
The braille markings on the control switch allow easy adjustment of the
temperature in the dark.
Each controller has the following settings:
0.
Off
1. Low heat
2.
Medium heat (all night use)
3.
High or pre-heat. Use this setting to pre-heat the bed one or two
hours before use only. WARNING: Do NOT sleep with the
control set to this setting.
