15
16
CONTROL PANEL
AUTO ON
MIN
PROGRAM
BREW STRENGTH
HOUR
ON/OFF
7:30
PM
1. Power ON/OFF Button:
Use this button to turn the unit on and start the brewing
process. You can also turn the unit off by pressing this button when the brewing
cycle is complete.
2. Hour Button:
Use this button to display the correct hour when setting the time.
3. Program Button:
Use this button to program your coffeemaker to start brewing
at a specified time.
4. Brew Strength Button:
Use this button to select a stronger strength of brew.
5. Minute Button:
Use this button to display the correct minute when setting the
time.
6. Auto On Button:
Use this button to start brewing at the time you have pre-set.
You may also press this button to make the unit turn on at the same pre-set time
the next day.
B
How to Use
This appliance is intended for household use only.
BEFORE FIRST USE
Warning: To reduce risk of fire or electric shock, do not immerse cord, plug or
appliance in water or any other liquid.
1. before preparing coffee in your new coffeemaker, thoroughly clean the carafe,
carafe lid and removable filter basket in warm, soapy water.
rinse and dry. replace disassembled parts.
Note:
The removable filter basket must be placed into the
coffeemaker with the two handles, located on the sides of the
filter basket, aligning with the two notches on the inside of the
unit
(c)
. Press the filter basket down until it clicks into place.
2. Clean the inside of the coffeemaker by brewing two full
carafes of tap water (see brEWiNg iNSTrUCTiONS). Do not
place permanent filter or coffee in the removable filter basket
for this initial cleaning.
Note:
At the end of the first brewing cycle, turn the coffeemaker
off and wait ten minutes for the appliance to cool. Turn unit on and brew second
carafe of cool water.
BREWING INSTRUCTIONS
Note:
The display on the clock will flash when you plug in the unit. You may set the
clock at any time (see SETTiNg ThE CLOCk) before or after brewing. Setting the clock
will not affect normal brewing operation.
1. Place the coffeemaker on a flat, level surface. Plug the unit into an AC electrical
outlet.
2. Open the lid by using the lip located on top of the coffeemaker.
3. Place a permanent filter into the removable filter basket. Measure one level
tablespoon of drip or regular ground coffee for each cup of coffee desired. For
stronger or milder coffee, adjust amount of grounds to suit your taste.
Note:
We recommend using coffee ground specifically for automatic drip
coffeemakers.
4. Fill the carafe with cold water and pour it into the water reservoir to the desired
level. No less than two cups are recommended. Place the carafe on the warming
plate.
Important: Always use fresh, cool water in your appliance. Warm water or other
liquids, except as listed in the Care and Cleaning Instructions, may cause damage
to the appliance.
Note:
The amount of brewed coffee will always be less than the amount of water
placed into the coffeemaker, since about 10% is absorbed by the coffee grounds and
filter.
5. Close the Lid.
6. in order to turn unit on, press the ON/OFF button. The red “ON” light will illuminate
and the word “ON” will appear in the upper right hand corner of the LCD, indicating
that the brewing cycle has begun. hot water will be dispensed gently and evenly
through the coffee grounds.
C
