Sleep function
1.
In cooling mode, by pressing the SLEEP button, the set temperature will increase 1
o
C at the 1st
hour, another 1
o
C at the second hour, then keeps at that temperature.
2.
In heat mode, by pressing the SLEEP button, the set temperature will descend 1
o
C at the 1st hour,
another 1
o
C at the second hour, then keeps at that temperature.
3.
In sleep mode, the ventilation will keep at low speed. Re-press the SLEEP button, the setting
temperature and ventilation speed will return to the pre-selected one.
4.
The unit will shut down automatically after the SLEEP function running for 12 hours.
5.
Please note, the sleep function is not available while the machine is working in ventilation,
dehumidification or auto mode. Only available in Cooling or Heating mode.
6.
When the machine is in Sleep function, the Fan Speed would turn to be LOW speed.
Swing function
By pressing SWING button, the air vent will rise in 3 different angles: 45º
、
60º
、
75º
Every time when you turn on the machine, the air vent will rise to position 75º first, then return to position
45º automatically. For re-setting the angle, the air vent will rise to 75º first, too. The interval of each
move is 4 sec.. As you turn off the air vent, the air vent will close.
FIG.14
Dehumidification function
In dehumidification mode, the temperature cannot be adjusted, the ventilation will fix at low speed.
Heating function
When using Heat Pump, it can reverses the compressor discharging the hot air indoor instead.
The
Exhaust Pipe must still be fitted to allow the cold air to be removed in this mode & used in the
usual way
. Under this system, the machine can run at HIGH/MED./LOW speed.
Self-diagnosis
This machine is equipped with self-diagnosis function. If something is wrong in the machine, the LCD will
show the word “E1” or “E2”. As this time, please call your service centre.
All the above functions can also be performed with the
supplied remote control.
This remote control requires 2 pcs AAA batteries to
operate
FIG.15
45
o
60
o
75
o
