background image

 
 
 

EXCLUSIONS TO W A R R A N T Y AND EXTENDED WARRANTY 

 

1.  Any accessories supplied with the product, including but not limited to, bowls, jugs, mills or carafes made either 

of glass or plastic and supplied with this appliance (hereinafter referred to as “the accessory or accessories”), is 
warranted to be free from material and workmanship defects for the duration of the appliance warranty.  

2.  The accessories should give trouble free service when used in accordance with the directions described in the 

instruction manual. However, the accessories will be damaged if subjected to impact, and this damage is not 
covered by the warranty. Such impact damage can occur either from the outside (if for example it is dropped or 
knocked against a hard surface), or from within (if for example foreign objects are placed within the accessories 
and the power is switched on). 

3.  Should you need to replace an accessory during the warranty period; a claim for a free replacement will only be 

considered if the item (including all shards and broken parts) is returned to the nearest HOLB service centre for 
examination.  

4.  The remains of the accessory will be carefully examined by the relevant professionals and if it is determined (at 

the sole discretion of HOLB) that the damage was caused by impact, then the claim will be refused and will not 
be covered by the warranty or any extended warranty.  

5.  Any replacement part provided in terms of clause 4 above will become a chargeable item payable by the 

customer. 

Summary of Contents for RHI226


















Reviews: