WATER SPRAY FUNCTION
This function can be used at any time and it does not affect other functions. Press the
spray button to spray water on clothes, as often as required.
NOTE:
When using the water spray function, ensure that there is enough water in the
water tank. You may have to pump the spray button several times during first use in order
to start the spraying function.
DRY IRONING
This function irons without the use of steam.
1. Connect the iron with a suitable mains power supply outlet.
2. Set the steam knob to position
“0”/ “no steam”
.
3. Turn the temperature dial to the correct ironing temperature according to the
recommendation of the garment label.
4. Wait until the pilot light cycles a few times or wait for at least 3 minutes for the
temperature to stabilize before ironing. The pilot light will glow to indicate that the
iron is heating up.
5. When the required temperature is reached, the pilot light goes off. The iron is ready
to use.
6. After use, turn the temperature dial to the
MIN
position to switch off.
7. Disconnect the iron from mains power supply outlet.
8. Follow cleaning and maintenance instructions.
STEAM IRONING
1. Fill the iron as described in "
How to Fill the Water Tank"
.
2. Connect the iron to a suitable mains power supply outlet.
3. Turn the temperature dial to the
MAX
position.
4. Wait until the pilot light cycles a few times or wait for at least 3 minutes for the
temperature to stabilize before ironing. The pilot light will glow to indicate that the
iron is heating up.
