Russell Hobbs RHFP5000 Instructions & Warranty Download Page 5

Page: 5 / 28

BEFORE FIRST USE

CAUTION:

Handle chopping blades and discs carefully.

• Carefully remove all packaging material, any stickers and the plastic protector from the

power plug.

• As some parts may be packed separately, check to ensure all items have been unpacked

before disposing of the packaging.

• All parts need to be thoroughly cleaned before being used for the first time (see CARE

AND MAINTENANCE).

• Remove and save instruction booklet.
• Select a level, dry countertop where the appliance is to be used, allowing air space on all

sides to provide proper ventilation for the motor (50mm gap min).

ASSEMBLY OF THE FOOD PROCESSOR

1. Determine which of the below attachment to use for the processing task:

S Blade

Mini S Blade

Dough Blade

Reversible Grating/

Slicing Disc

Reversible

Shredding/Slicing

Disc

Chop, puree, mix

Large workbowl

only

Chop, puree, mix

(small quantities)

Small workbowl

only

Knead, mix

Large workbowl

only

Grate, slice (thin)

Shred, slice (thick)

High speed or pulse

Low speed

Medium speed

IMPORTANT:

Always make sure your food processor is unplugged and

placed on a flat, level surface before starting to assemble.
2. Place the large workbowl onto the base, with the handle facing

forward at a 45 degree angle to the left.

3. Holding the workbowl by the handle, turn the workbowl

counterclockwise to lock it on the base. You will hear it click when
it is securely attached. (A)

Note:

Ensure that the workbowl is locked into place before attaching

the blades or discs and lid (see following sections for individual
instructions on discs and blades).
4. Attach your selected blade or disc to the blade shaft and put

the assembly onto the centre post in the large workbowl (NOTE:
The blades need to be locked onto the blade shaft. Please see
instructions for individual discs/blades on the following pages of
this manual.)

GETTING STARTED

• Remove all packing material, any stickers, and the plastic band around the

power plug.

•  Remove and save literature.
•  Please visit www.prodprotect.com/applica to register your warranty.
•  Wash all removable parts as instructed in CARE AND CLEANING

section of this manual.

• CAUTION: Handle blades and discs very carefully. They are very sharp.
• Select a level dry countertop where the appliance is to be used allowing air space on

all sides to provide proper ventilation for the motor.

USING YOUR FOOD PROCESSOR

1. Determine whether you will be using the S Blade, the Mini S Blade, the Dough Blade, or the

Shredding/Slicing Disc.

S BLADE

MINI S

BLADE

DOUGH

BLADE

Slicing/

Shredding

Disc

CHOP, PUREE,

MIX

CHOP, PUREE,

MIX (small

quantities)

KNEAD, MIX

SLICE, SHRED,

GRATE

HIGH SPEED

OR PULSE

HIGH SPEED

OR PULSE

LOW SPEED

MEDIUM SPEED

Important:

Always make sure your food processor is

to assemble.

2. Place the workbowl on the base, with the handle facing

forward at a 45 degree angle to the left.

3. Hold the bowl in place by the handle. Turn the workbowl

counterclockwise to lock it on the base. You will hear it click
when it is securely attached. (A)

HOW TO USE

This product is for household use only.

Note:

Be sure to lock the workbowl in place before attaching the

blades or discs and lid.

4. Attach your selected blade or disc to the blade shaft in the

bottom of the large workbowl (instructions for individual
discs/blades follow in this manual).

5. Place the lid on top of the workbowl, aligning the tabs and

locking it into place by turning counterclockwise. The lid is
locked when it clicks firmly into place. The lid will only lock
when the feed chute is aligned with the workbowl handle. (B)

USING THE FEED CHUTE AND PUSHERS

Note:

Before operating the food processor, be sure the

workbowl, blades and lid are properly assembled on the food
processor base.
LARGER FOODS

1. Insert the small food pusher inside of the large food pusher.

Use them together to guide ingredients through the large feed
chute. (C)

SMALLER FOODS OR LIQUIDS
1. Insert the large food pusher into the large feed chute of the

lid. (D) Push down until the large food pusher clicks into
place and rests at the bottom of the feed chute.

2. Place food to be processed in the opening of the large food

pusher. Use the small food pusher to guide ingredients through
the center of the large food pusher. The small food pusher can
be removed to add liquid or additional foods. (E)

Note:

The large food pusher must remain in the large feed chute

in order for the processor to operate.

USING THE SPEED CONTROLS

Note:

If the food processor does not run, make sure the workbowl

and lid are properly locked on the base and the large food pusher is
fully in place. There is an automatic safety lock that causes the food
processor to stop working if the large food pusher pops out and/or
the lid and workbowl are not properly locked in place.
The controls are located on the front of the base. See the speed
chart for food processing and speed recommendations. Various
speeds are used for chopping, mixing, and slicing/shredding. When
these functions are selected the processor will run continuously
until the OFF|PULSE button is pressed to stop. (F)