15
THE WATER COLLECTOR/ BOX
The water collector is included is included in the accessory bag provided. The water collector
should be attached to the pressure cooker. The purpose of the water collector is to collect the
steam which drips off/ runs/ overflows from the inner pot as you open the lid after the cooking
cycle. It is easy to clean by simply detaching it from the side of the cooker.
SAFELY OPENING THE LID
Turn the appliance off and remove the plug from the power outlet located at the wall.
Utilize your chosen exhaust method.
Once the appliance has exhausted all pressure. You may open the lid.
Turn the lid anticlockwise, lift the lid up and off from the main pressure cooker body.
Note:
Do not open the lid before the pressure in the pot has been completely released/
exhausted. Do not open the lid if it feels difficult to open.
Do not pull the Exhaust Valve out when turning the exhaust valve.
After cooking liquid-orientated foods (for example, porridge or soup), do not turn the
Exhaust Valve. Turn the appliance off and remove the plug from the power outlet. Allow
the appliance to cool naturally until the Float Valve drops before opening the lid.
After cooking a large amount of food, please do not immediately exhaust. We suggest
that that you allow the unit to switch over to the Keep Warm function/ mode for a few
minutes before opening the lid.
MULTI-FUNCTION MENU
Standby Mode
After supplying power, the default is standby state, the digital screen flashes “----”
