BLENDER JUG
Use the Blender Jug for blending soups, sauces and smoothies; and for chopping small
ingredients like herbs, spices and nuts.
BEFORE USE
All parts of the Pro-Mix including the Blender Jug need to be thoroughly cleaned before
being used for the first time. (See the “
Care and Maintenance
” section)
POSITIONING
Place the Pro-Mix on a firm, stable, level surface.
Position the power cord away from the edge of tables or countertops so it cannot be
tripped over or caught.
Fit the bowl and splash guard cover to the Pro-Mix. The Pro-Mix drive operates when
the motor is running.
Caution:
Do not operate the blender accessory empty for more than 1 (one)
minute. Never fill the glass jug with boiling liquid. Allow liquids to cool down to
ambient room temperature. By not following this caution, the appliance could
overheat and the glass of the jug could crack.
USING THE JUG
Caution: The cutting blades are very sharp. Handle the Blender with extreme care
and caution.
Press the blender drive cover release to open the cover and expose the drive for the
jug.
Align the jug so the spout points along the head of the Pro-Mix.
Lower the jug onto the drive.
Push the handle towards the rear of the Pro-Mix to turn the jug anti-clockwise and
lock it into place.
FILLING THE JUG
Caution: Do not use the jug without fitting the lid.
Place the ingredients into the jug.
Do not fill past the
MAX
mark (1.4 litres) as the contents may force their way past the
lid when you start the motor.
Fit the lid on the jug and press it down fully to secure it.
POWER UP
Caution: - If the speed control is not set to ‘0’ (off position) the Pro-Mix will start
when the power supply is connected.
- If accessories are not fitted correctly you may damage the machine.
• Check that the speed control is set to “
0
”.
• Put the plug into the wall power outlet and switch it on.
9
Summary of Contents for Pro-Mix RHSB032
Page 66: ......
