setting the countdown timer
This function switches off the machine after a set period of time and is only settable
from the remote control. Pressing the
COUNTDOWN
button on the remote control
will activate the countdown timer. Pressing the button once will select
8 hours
countdown.
Pressing again will select
4 hours
, then again will select
2 hours
then again will select
1 hours
then again will turn the countdown timer off.
As each time interval is selected the number will flash. If you stop pressing the button
then the last number flashing will be selected and the will appear in the display to
confirm the countdown timer has been set. If you press the
COUNTDOWN
button
after already setting the countdown timer then the display will automatically show the
time period below the one you previously selected.
moving your air purifier
Ensure the unit is switched off and the plug is not attached to the wall socket.
Insert your hand into the carrying handle located at the top of the back panel.
Do not use the air intake grooves on the front panel to help lift the air purifier as the
front panel may come off in your hand whilst the rest of the air purifier hits the floor.
Lift and carry to your required location.
care and maintenance
Unplug from the power source before cleaning.
Accumulated dust may be removed from the surfaces with a soft cloth. The air intakes
on the front panel will get especially dusty so you should clean this panel frequently.
The air purifier may be cleaned with a cloth that has been moistened with a solution of
mild detergent and water. Dry the air purifier thoroughly before operating.
Don’t use harsh or abrasive cleaning agents or solvents as this will cause damage.
Never immerse the air purifier in water or allow water to enter the air purifier
housing as this could create an electric shock hazard.
filter maintenance
It is vitally important that you maintain your filters in accordance with our instructions
otherwise the performance of your air purifier will be compromised.
You should check appearance of the pre filter on a regular basis. When it gets dirty
you should remove it from the HEPA filter plastic frame and clean it with your vacuum
cleaner or rinse it using warm water and a mild detergent. Do not scrub it or wring it.
You must wait for it to dry completely before replacing it.
To replace it simply pull all four corners into the frame until it covers the area of the
HEPA filter behind it.
To help you determine when the HEPA filter needs replacing the unit is equipped with
a filter check indicator. When the unit feels a replacement may be necessary you will
notice the appear on the LCD display. When you see this you should remove
the HEPA filter from the main body and examine the colour of the filter.
There is a guide at the top left hand corner of the frame which indicates when a
change of HEPA filter is required. A new HEPA filter will start off white and with use
will become progressively darker. When the colour of the HEPA filter matches the
darkest colour on the indicator then its time to replace your filter.
If you decide not to change your filter at this time the unit will start flashing the
at a later stage as a further reminder. Once you have replaced your HEPA filter press the
and buttons simultaneously to clear the from the display.
Never try to wash or clean or vacuum your HEPA filter as this will likely result in damage.
12
Check Filter
MODE
SET
Check Filter
Check Filter
Filter life depends on how often and long the Air Purifier is used and the air quality.
Generally speaking, the HEPA filter will last around 12 months,
and the Carbon filter will last around 6 months.
ountain
BREEZE
C L E A N A I R
