background image

13

To check whether the activated carbon filter needs replacing you should 
hold it up to the light. If you can see light coming through then it has some 
life left; if you can’t see any light coming through then the filter is clogged up and

needs replacement. To replace the filter just pull it out of position using the tab provided 

and fit a replacement part into place, paying attention to fit it the correct way around. The front has

FRONT

clearly marked on the top of the filter. The Carbon filter may last  between 3 and 6 months 

The sterilisation mesh is permanent and will never need replacement. However with
prolonged use it may become a little dusty. If it looks dusty you should remove the
three UV tubes and gently vacuum using a soft tipped brush attachment. Do not knock
the surface of the filter or it may damage.

UV tubes

The UV tubes need replacement from time to time. The LCD screen will alert you to a
faulty UV tube by displaying one or more of the following icon.

corresponds to the top tube,     to the middle and     to the lowest tube so you can

easily locate the faulty tube.
To replace a tube, grip both metal ends and rotate 90 degrees towards from you.
Once rotated the tube becomes unlocked and can easily be pulled towards you.
To replace a tube grip on the metal ends, and rotate 90 degrees away from you. It will
click into place when correctly fitted.
Never rotate the tube by gripping the glass as this may cause injury.
Your air purifier has been fitted with safety devices so the tubes cannot operate with-
out the front cover or HEPA filter in place. Never disable these safety switches.
The tubes are UV-A type and replacements can be ordered.

dust sensor

The dust sensor is located in the inner body, just above the filters. This should be
cleaned once a month for optimum performance.
Firstly remove the dust sensor cover and wipe the lens using a cotton wool bud.

UV1

UV2

UV3

ordering spare parts

Spare parts can be ordered from Salton via our website 

www.salton.com.au

 

or by contacting our service department on Freecall 1800 427 842. Please quote the
following when ordering your replacement filters:

MBSP1  Replacement Hepa and Pre-filter
MBSP2  2x Replacement activated Carbon filters
MBSP3 3x 

Replacement 

UV 

tubes

MBSP4  Replacement filter pack (HEPA + 2x Pre filter + 2x Carbon filter)
 

if there is cigarette smoke in the house. UVA tubes last for around 10,000 hours (to 50% failure). 

ountain

BREEZE

C L E A N   A I R

Summary of Contents for Mountain breeze 12746















Reviews: