6
•
To refill at any time during use, turn steamer off by pressing the power button until the blue
indicator light is off, unplug from outlet, and follow the above procedure.
NOTE: After refilling, allow to reheat for 45 seconds and then prime pump by holding steam trigger until
steam forms.
USING
• If the label says “do not iron” or shows this icon
i
, fit the delicate attachment and make
sure to test on an inconspicuous area prior to steaming the entire garment.
• If the label says “do not steam” or shows this icon
, do not steam the garment.
1. Hang the garment in an area that will not be affected or damaged by the heat and steam,
such as on a shower curtain rail, or in an open doorway.
2. Fit any attachment you wish to use.
3. Plug the steamer in then press the power button. The blue power button light will slowly flash,
indicating that the steamer is heating.
4. After about 45 seconds the power light will stay on, indicating the steamer is preheated.
5. Prime the water pump by holding steam trigger until steam forms.
6. To generate steam, press the steam trigger. As long as the trigger is held, steam will emit
from the steamer. When the trigger is released, the steam will stop.
7. To generate a constant flow of steam without holding the trigger, press the steam trigger and
then slide the steam trigger lock downwards. You can then release pressure on the steam
trigger. To turn the steam off, press the trigger, slide the steam trigger lock upwards, then
release the trigger.
8. With your free hand keep the fabric taut. Steam the garment with slow, downward strokes,
keeping the head of the steamer in contact with the fabric.
9. When you have finished, press and hold the power button until the blue light goes out (about
3 seconds) and unplug.
10. Stand the steamer on its base and allow it to completely cool off before storing. To avoid
mineral buildup, empty the tank after each use.
Ceramic heated plate
Your steamer features a ceramic heated plate that helps smooth out wrinkles and creases on the
areas of garments that are more difficult to reach with steam alone. The temperature of the plate
is safe for all ironable fabrics.
To use, hold the plate of the steamer directly against the fabric. Don’t fit any of the attachments.
Steam the garment with slow, downward strokes while keeping the plate in contact with the
fabric.
Using the scent infuser
The scent infuser attachment can be used to infuse your fabrics with your
favourite scent.
• The use of scents, oils, or other fragrances is at your own risk and we
accept no liability. Always read any instructions, warnings or advice
regarding the use of the fragrance before using it with your steamer.
Always use the scent infuser in a well ventilated room.
•
Always remove and refit the scent infuser attachment when the steamer
is cold and not producing steam.
•
Always have the scent infuser fitted when using the delicate fabric attachment. Remove the
fabric pad if you don’t want to infuse a scent to the fabric being steamed.
3
h
B
h
C
h
D
h
E
h
F
h
G
MAX
Summary of Contents for 9322219030083
Page 9: ...9 NOTES...
