OPERATING INSTRUCTIONS
BEFORE FIRST USE
•
Remove any protective films or stickers from the soleplate and the iron’s body.
•
Wipe the soleplate with a dry soft cloth.
•
Unwind and straighten the power cord.
•
Fill the iron as described in the section “How to Fill the Water Tank”.
•
Connect the appliance to a suitable mains power supply outlet.
•
Turn the Temperature Dial to the MAX position.
•
Wait until the pilot light cycles a few times or wait for at least 3 minutes for the
temperature to stabilize before ironing. Once the pilot light goes off after the cycle,
then the required temperature is reached.
•
Move the steam knob to the ON position - steam will start to come out from the vents
on the soleplate.
•
Begin first time ironing with an old towel.
•
When the water tank is empty and there is no more steam that can be produced; the
preparation work is completed.
•
The iron is now ready for normal use
.
Note:
It is normal for small amount of smoke to be produced the first time you use the iron,
this will quickly disappear. When using the steam function for the first time, do not direct the
steam towards the laundry, as there could be debris from the steam vents.
