3.
Turn the temperature dial to the correct ironing temperature according to the
recommendation of the garment label.
4.
Wait until the pilot light cycles a few times or wait for at least 3 minutes for the
temperature to stabilize before ironing.
5.
Once the pilot light goes off after the cycle, then the required temperature is reached.
6.
After use, turn the temperature dial to the
“0”/ “OFF”/ “MIN”
position to switch it off.
7.
Disconnect the iron from mains power supply outlet.
8.
Follow cleaning and maintenance instructions.
STEAM IRONING
This function can only be used at a higher ironing temperature – moderate or max position.
1.
Connect the iron to a suitable mains power supply outlet.
2.
Set the steam knob to position
“0”/ “no steam”
.
3.
Turn the temperature dial to the correct ironing temperature according to the
recommendation of the garment label.
4.
Wait until the pilot light cycles a few times or wait for at least 3 minutes for the
temperature to stabilize before ironing. The pilot light will glow to indicate that the iron
is heating up.
5.
When the required temperature is reached, the pilot light will go off. The iron is ready
to use.
6.
After use, turn the temperature dial to the
MIN
position to switch off the iron.
7.
Disconnect the iron from mains power supply outlet.
8.
Follow cleaning and maintenance instructions.
Note: This iron has an anti-drip feature: if you are ironing garments for a long period of time,
the soleplate temperature may decrease. The anti-drip function will ensure that water does
not leak from the soleplate during this time
.
SELF-CLEANING
This function removes the scale and minerals built up in the steam chamber. The iron will
remain in the best condition if this function is performed once every two weeks. You may
choose to use the function more frequently depending on the hardness of the water used or
water available in your local area.
•
Make sure that the appliance is unplugged from the mains supply outlet.
