13
thermal cut-out
76 The deep fryer is fitted with a thermal cut-out. If it overheats, and
the thermostat fails to switch off, the thermal cut-out will cut the
power to the element. This is not self-resetting. If the thermal
cut-out operates, get in touch with Customer Service
Department, so that the cause may be investigated, and rectified/
repaired as appropriate.
care and maintenance
1 Unplug the fryer when not in use, before moving and before
cleaning.
2 Let it cool down fully before cleaning and before storing away.
3 If you intend to move the fryer without emptying it, take care, it’ll
be heavy.
4 Don’t put the deep fryer in water or any other liquid.
5 Don’t put the deep fryer in a dishwasher.
6 Don’t use harsh or abrasive cleaning agents or solvents.
7 Cover the work surface generously with kitchen paper (at least
three layers thick).
8 You’ll need a suitable container (5 litre) for the used cooking oil. If
the container isn’t wide necked, use a wide necked funnel.
9 If you want to filter the oil at the same time, support a fine sieve
over a wide necked container, or fit the funnel with a filter paper.
10 Press the latch on the filter cover in towards the cover, then lift
the cover out of the lid.
11 Remove the filter – don’t wash it, just leave it
to dry out. If it’s been used more than about
60 times, replace it with a fresh one.
12 Put a finger under the end of the handle and
lift it through 90 degrees, till it locks in the
raised position, with the basket out of the oil.
13 Open the lid.
14 Use the handle to lift the basket straight up,
out of its mounts in the front of the fryer.
Summary of Contents for 14559
Page 1: ...instructions ...
Page 2: ...2 ...
