RUSH MH 6 Wash
™
User Manual
9
Introduction
The MH 6 Wash
™
is a fast, powerful LED moving head wash effect
incorporating twelve long-life LEDs with full RGBW color mixing and 36 color
presets. The fixture also provides smooth electronic dimming, strobe effects,
and a 10° - 60° zoom angle. It can be controlled by any DMX-compliant
controller. The rugged, lightweight and compact fixture is suitable for both
portable and fixed applications.
The fixture is supplied with this user manual, a 1.5 m (5 ft.) power cable (local
power plug not included) and an omega-type mounting bracket for rigging
clamp attachment.
Before using the product for the first time
1. Read ‘Safety information’ on page 4 before installing, operating or
servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using
the fixture. Do not attempt to operate a damaged fixture.
3. If the fixture is not going to be hard-wired to a mains supply, install a local
power plug (not supplied) to the end of the supplied power cable.
4. Before operating, ensure that the voltage and frequency of the power
supply match the power requirements of the fixture.
5. Check the RUSH support pages on the Martin Professional website at
www.martin.com for the most recent user documentation and technical
information about the fixture. RUSH by Martin™ user manual revisions are
identified by the revision letter at the bottom of the inside cover.
Note that whenever AC power is applied to the fixture, it will reset all effects
and functions to their home positions. Be prepared for the fixture head to
move. A reset usually takes around 20 seconds.
