20
RUSH MH 6 Wash
™
User Manual
2. A reset takes approx. 20 seconds. After this, the fixture returns to its state
before the reset.
Home position (offsets) adjustment
If the fixture head or zoom angle do not return to their home positions, even
after a reset, you can adjust their home positions by defining offsets.
To make the adjustment from the control menu:
1. In the menu structure, press and hold ENTER for at least 3 seconds to
enter Offset mode.
2. Use the DOWN and UP buttons up to choose PAN OFFSET, TILT
OFFSET, or ZOOM OFFSET. Press ENTER and the display will blink.
3. Use the DOWN and UP buttons to adjust the effect’s home position.
4. Press ENTER to save your selection.
To make adjustments via DMX:
1. Select the fixture on the controller.
2. For each effect that requires calibration, enable calibration (DMX value 55-
59) on the fixture’s DMX channel 14, Fixture Control Settings.
3. Adjust zoom position on channel 9, pan position on channel 10, or tilt
position on channel 12.
4. Store the effect’s calibration value on DMX channel 14. Store zoom
calibration with DMX value 230-234, pan calibration with DMX value 235-
249, or tilt calibration with DMX value 240-244.
5. Repeat steps 2 – 4 as necessary.
6. When finished calibrating effects, set channel 14 to “No function” to
resume normal DMX control.
