RUSH MH 6 Wash
™
User Manual
19
5. Press ENTER to save your selection.
Manual test
Fixture functions can be individually controlled and tested manually. This
feature can be also used to set up a static scene without a controller. To
operate the fixture effects manually:
1. Select MANUAL TEST and press ENTER.
2. Use the DOWN and UP buttons to select PAN, TILT, RED1, GREEN1,
BLUE1, WHITE1…RED4, GREEN4, BLUE4, WHITE4, ZOOM, DIMMER
or STROBE.
3. Once the mode has been selected, press ENTER.
4. Use the DOWN and UP button to change the value (0-255).
5. Press MENU to exit.
Auto test
To perform a complete test of all fixture functions:
1. Select AUTO TEST and press ENTER. The fixture will run a self-test
routine.
2. Press MENU to exit the test.
Temperature
To check the onboard temperature of the fixture:
1. Select TEMP and press ENTER. The display will show the temperature of
the unit.
2. Press MENU to exit.
Fixture time
To display the fixture’s operating hours counter:
1. Select FIXTURE TIME and press ENTER. The display will show the
number of hours the fixture has been in operation since manufacture.
2. Press MENU to exit.
Reset
The fixture resets each time you power it on, but you can also reset the fixture
manually from the control panel and by DMX. To carry out a manual reset:
1. Scroll to RESET and press ENTER to reset the fixture (or press MENU to
exit without resetting).
