EN
22
It is recommended to dispose of used engine oil in a manner compatible with
environmental protection rules. We suggest storage in a sealed container at the local
service station or recycling center. Do not throw it in the trash, do not spill it on the
ground or in the wastewater network.
SPARK PLUG MAINTENANCE
Do not use the spark plug beyond the permitted thermal
limits. To ensure proper operation of the machine, the
spark plugs must be properly spaced and free of
sediment.
1) Remove or replace the spark plug using the special
key.
2) Visually check the spark plug. Replace any spark plug that is worn or has a cracked /
defective dielectric. In case of reuse, it is necessary to clean with wire brush.
ATTENTION!
Do not touch the spark plug shortly after the machine has been turned off
because it is extremely hot.
3) Measure the gap with a measuring lore. Pull the electrode, if necessary, to adjust.
0.7-0.8mm is the appropriate gap interval.
4) Check that the spark plug mounting was in proper condition .
5) Screw the spark plug manually as far as it allows, then tighten with the special key.
Hold the gasket firmly.
ATTENTION!
When mounting a new spark plug, tighten the shift by fixing the gasket
properly. When mounting a used spark plug, tighten 1 / 8 - 1 / 4 after the gasket is
properly fixed.
▪
The spark plug must be tightened. Otherwise, it will become extremely hot and will
cause damage to the machine.
▪
Use the recommended spark plug. Otherwise, the machine may be damaged.
