EN
13
7. COMMISSIONING
7.1 ASSEMBLY
1.Attach the support legs of the generator using the screws provided.
2.Install the transport wheels on the generator frame using the bolts, washers and fuses.
3. For models equipped with automatic start, connect the battery terminals accordingly
with the help of their fixing screws.
7.2 STARTING
▪
If a machine starts to work abnormally, becomes slow or stops abruptly, turn it off
immediately. Disconnect the machine and determine if the problem is the machine or if
the rated load capacity of the generator has been exceeded.
▪
Make sure that the rated load capacity of the tool or device does not exceed the power
of the generator. Never exceed the maximum power of the generator. The power levels
between the nominal and maximum value can be used for up to 30 minutes.
WARNING!
▪
If the petrol generator is to be connected to the household power supply, only
electrical technicians will make the connection. Any improper connection can lead to fire
hazard or damage to the gasoline generator while the generator is connected to the
equipment.
▪
The overload protector will be triggered automatically when the circuit is overloaded.
Always take the following steps to keep the generator in good condition.
1. Always connect the generator with earth to prevent any danger.
2. If the generator must provide electricity for the above loads, make sure you connect
them to the power supply.
Generator startup:
