EN
22
a. Remove the spark plug. Remove the spark plug and clean any impurities from
the spark plug electrodes.
b. Mount the spark plug in the pipe.
c. Put the engine contact on the ON position
d. Put the side electrode of the spark plug in connection with the engine housing
and pull the starter handle.
e. If sparks do not occur, then change the spark plug. If it's okay, try to start as
instructed by some.
7. If the engine does not start, take the motor pump to an authorized Ruris service.
When the motor pump does not pump, check :
1.
If the pump is primed.
2.
If the sorb is clogged.
3.
If the fixing necklaces are firmly tightened.
4.
Unless the hoses are damaged.
Summary of Contents for MP90
Page 1: ...Motopompă MP90 ...
Page 27: ...EN MP90 Water Pump ...
