EN
7
hose must not be longer than necessary, as the pumping performance is best when the
pump is not far from the water level.
The self-priming time is proportional to the length of the absorption hose. The sorb that
comes with the pump will be coupled at the end of the suction pipe via a tightening
necklace.
PRECAUTION:
Always mount the sorb at the end of the suction line before starting pumping. The sorb
will not allow leaves, roots or other residues that can clog the pipe or damage the motor
pump.
The support point of the sorb must be solid (not on sand, gravel, mud, etc.).) or 0.5 m
from the bottom of the water.
In case of extraction of water from the bed of a river, pumping will be carried out from an
area protected from the watercourse (home).
NOTE:
Tighten the pipe connection and clamping necklaces to ensure sealing and
prevent loss of absorption. An improperly sealed absorption pipe will reduce pumping
performance as well as self-priming capacity.
●
Suction line
(
not included in the package
)
●
Pipe necklace
●
Sorb
5.1 ENGINE OIL CHECK
PRECAUTION:
Summary of Contents for MP90
Page 1: ...Motopompă MP90 ...
Page 27: ...EN MP90 Water Pump ...
