Ruris GOSPODAR A1, Manual

Page: 79 / 113

EN
15
* Connect the device and let it run for 1 minute.
* Close the flow hole.
* Pour grain into the tray by adding it when empty. Cereals must be cleaned of hard
objects.
* Open the flow hole a little.
* Depending on the grinding and diameter of the sieve, the supply of cereals is made
according to the opening of the adjustable flow hole (4). The higher the flow hole opening,
the lower the grinding speed. To obtain a perfect grinding depending on the diameter of
the sieve, the opening of the hole must be smaller.
* Turn off the appliance only after processing the cereals poured into the funnel.
* To change the grinding granulation, change the sieve surrounding the hammers.
* Do not allow the mill to be overloaded with cereals. This can damage the engine, the
funnel.
6.1 OPERATING RULES AND LIFESPAN
Before the mill runs and also after a long break in operation, the engine must run empty
for 1 minute. This process is necessary for heating the coil.
Check the condition and safety of the bolted joints before each use.