Ruris GOSPODAR A1, Manual

Page: 81 / 113

EN
17
Use of cleaning means such as gasoline, ammonia, liquids, etc., will lead to exposure to
the risk of fire or electric shock.
7.1 TECHNICAL STORAGE AND MAINTENANCE
Store the mill indoors closed at a temperature between -10
° C
and + 30
° C
To prevent damage to the electric motor after the mill is brought from a low temperature
into the working space. It is necessary to keep the grain mill in that space for 10 minutes
without starting. Thus, the phenomenon of condensation can occur through temperature
differences, which can lead to damage to the engine of the mill
In case of condensation do not switch the mill until it is completely dry. Regular technical
maintenance is the guarantee of long life.
Perform technical maintenance only after disconnecting the mill from the power supply.
After finishing the work, clean the dust appliance. Make sure the vents are clean and
released.
ATTENTION! In the event of dismemberment of the mill during the warranty period, it will
lose its validity.
8. PROBLEM GUIDE
If the engine does not start, check that the power cord plug is connected to the
voltage.
If the engine does not start, check that the switch "on" is positioned on the
“on”
mode.
If the engine does not start, check if voltage is reaching the electrical outlet.
If ground cereals are no longer evacuated, clean the sieve and reassemble it.
If you notice any noises or vibrations of the mill, stop urgently and contact an
authorized service.
REPAIRS