EN
6
2.2 SYMBOLS ON THE MACHINE
For safe operation and maintenance, there are symbols embossed on the product. Act
with caution according to the instructions.
(a) "Mixed fuel" refuelling point
Position
: near the fuel filling port
(b) Oil filling point for the chain
Position:
near the oil filling port
(c) Turning off the engine
Turn the knob to the "O" position to immediately stop the engine
(d) Choke lever operation
Pull the choke lever and the choke flap will close.
Push the choke lever and the choke switch will open.
Position:
behind and to the right of the rear handle.
(e) The oil pump flow is adjusted by
positioning the oil pump adjusting screw in one
of the 2 positions, as follows:
- MAX position, the oil flow will increase
- MIN position, the oil flow will decrease
(f). The screw next to the “H” symbol is the screw for adjusting the maximum
speed (if the symbol exists).
The screw under the “L” symbol is the screw for adjusting the minimum speed
(if the symbol exists).
the screw above the “T” symbol is the idle screw (if there is a symbol).
Position
: the adjusting screws are located above the fuel tank.