Ruris DAC 316E, Manual

Page: 99 / 182

EN
22
♦ Wrap your left hand around the front handle so that the back of your palm contacts
the front guard/chain brake assembly (4) and push the assembly forward toward the
workpiece (Fig. C). The saw chain (6) should stop within a few fractions of a second.
To reset the front guard/chain brake assembly (4) after use, follow the instructions in
the section "How to install the chain brake".
Note: Avoid restarting the tool until you hear the engine come to a complete stop.
Note: If the chain brake is malfunctioning, take the product to an authorized RURIS
service point.
authorised.
If the saw chain (6) or guide rail (7) gets stuck
♦ Disconnect the tool.
♦ Disconnect the tool from the power supply.
♦ Open the wedge cut-out to relieve pressure on the guide rail (7). Do not attempt to
force the saw out.