Ruris DAC 316E, Manual

Page: 105 / 182

EN
28
Separate collection of used products and packaging allows materials to be recycled and
reused. Reusing recycled materials helps prevent environmental pollution and reduces
demand for raw materials.
Local by-laws may provide for separate collection of household electrical products at
municipal waste centres or by the retailer when you purchase a new product.
11. SYMPTOMATIC STARTING PROBLEMS
Problem Possible cause The eventual solution
Tool won't start
○ The lock button is not
pressed ○ Press the lock button.
○ Front guard is in the
braking position ○ Reset the position of the
front guard.
○ Burnt safety ○ Replace the fuse
○ RCD triggered ○ Check RCD
○ Power cord not
connected ○ Check the mains supply
The chain does not
stop instantly when the
tool is stopped
○ Chain tension is too
low ○ Check chain tension
Hot rail/smoke
○ Oil tank is empty ○ Check the oil tank level
○ Oil hole is blocked on
the chain rail ○ Clean the oil hole
○ Chain tension is too
tight ○ Check chain tension
○ Guide rail wheel stud
requires greasing ○ Grease the guide rail
wheel stud with oil
The saw doesn't cut
well
○ The chain is mounted
backwards ○ Check/change direction
chain
○ Sharp
The saw does not
consume oil
○ There is residue in
the tank ○ Drain the oil from the tank
and replace it
○ Oil hole has blocked
cap ○ Remove debris from the
orifice
○ Residues in the chain
rail ○ Remove debris and clean
chain rail
○ Residues in the oil
discharge ○ Remove residues