Ruris AquaPower 1008S, Manual

Page: 90 / 155

EN
14
THE HYDROPHORE
SWITCHES OFF AFTER
A SHORT PERIOD OF
OPERATION BECAUSE
ONE OF THE HEAT
PROTECTION
SWITCHES HAS
TRIGGERED 1. Power supply
electrical is not in
accordance with the data
on the stamp plate
2. A solid object locks the
rotors.
3. The liquid is too
dense.
4. The liquid or
environment is too hot.
5. The hydrophore
operates without fluid,
the check valve on the
suction circuit is closed. 1.Verificatenandunota de la
terminaitethem cabituitui de
alimentare.
2. Dezasambitaand
curatayouhydrophore.
3. Diluayou fituiduit
pampat.
4-5. EitimiN / Ati chaveza
probitemei , aSteptayou that
hydrophore to se racshescale
andsa reporneasca.
THE HYDROPHOR
STARTS AND STOPS
TOO FREQUENTLY 1. The tank diaphragm is
damaged. 1. Have qualified diaphragm or
tank replaced by qualified
personnel.
THE HYDROPHORE
DOES NOT REACH
THE DESIRED
PRESSURE 1. The pressure required
to turn off the preset
hydrophore on the
pressure switch is too
low.
2. Air intake from the
suction pipe. 1. Contact the service.
2. See point 2.2.
THE HYDROPHORE
DOES NOT WORK
CONTINUOUSLY 1. The pressure required
to turn off the preset
hydrophore on the
pressure is too low.
2. Air intake from the
suction pipe. 1. Contact the service.
2. See point 2.2.