Ruris A109S, Manual

Page: 56 / 113

EN
5
The sprayer is designed for the application of plant protection products approved by
national authorities.
The sprayer can also be used (without product filling) for removing leaves, grass, paper,
dust and snow, e.g. in gardens, stadiums, parks or driveways (only valid when the
booster pump is disconnected).
Note: If a booster pump is fitted, it must be deactivated to use the atomiser as a
blower (applies to all models fitted with a booster pump).
When starting the engine, make sure there is fluid in the solution tank, otherwise
the pressure pump may fail. The atomiser solution tank must be cleaned after
each use
The atomiser shall only be used for the operations for which it is intended.
Tips for work
Approach the work area with the engine idling, open the machine's solution valve and
accelerate to start the spraying operation.
Particles entrained by the air jet can bounce off obstacles, endangering the health of
people around. Never work on an unstable support. Because of the increased danger
of tripping, pay attention to obstacles such as tree trunks, roots, ditches, etc.
We recommend special care when working on slopes.
Do not touch the muffler while it is hot.