RUPTELA ECO3, User Manual

Page: 6 / 67

© All rights reserved to Ruptela UAB
P a g e |
6
Any installation and/or handling during a lightning storm is prohibited.
Use cables provided with FM device.
Ruptela is not responsible for any harm caused by using wrong cables
for PC <-> FM Terminal connection.
Attention! Do not connect the wires marked (+ battery) wrongly and
(chassis) to battery poles. If poles are mixed, the device will break.
To disconnect the device from the power supply, you need to
disconnect 10 PINs plug and connect to internal battery.
This chapter contains information on how to operate with the FM terminal safely. By following
these requirements and recommendations, you will avoid dangerous situations. You must read
these instructions carefully and follow them strictly before operating the device! The terminal is
supplied from a car battery with these ratings: 12/24V
1A/500mA. The allowed voltage range
for the battery is: 10…32V DC.
To avoid mechanical damage, it is advised to transport the FM terminal in an impact-proof
package.
Before connecting the wires with 14 PINs plug to the vehicle, ensure that 10 PINs plug is
disconnected from the terminal. Be sure that cross-sectional area of wires mounting is at least
0.75 mm
2
.
To dismount terminal correctly from the vehicle, first of all disconnect 10 PINs plug and only then
other plugs or interfaces can be disconnected.
Always connect 14 PINs plug before connecting 10 PINs plug.
The terminal is intended to be installed in a restricted access location, which is not accessible for
the operator. The terminal is not intended to be used for boats.
FM Manual