RUPTELA ECO3, User Manual

Page: 57 / 67

© All rights reserved to Ruptela UAB
P a g e |
57
Both actions, saving and loading, can be completed whether the device is connected or
disconnected from PC.
Different device types (FM-Eco3, FM-Pro3, FM-Tco3) have slightly different configuration options.
So when configuring without connected device, pay attention to which type is selected (Fig.
5.3.4.2.). Each device type has its own configuration file extension: FM-Eco3 – .fe3c, FM-Pro3 –
.fp3c, FM-Tco3 – .ft3c.
5.3.5. SAVING AND LOADING CONFIGURATION
In the main view upper left corner there are “Send CFG” and “Get CFG” buttons, which are
responsible for configuration exchange with device. These actions can only be performed when
connected to COM port (chapter 5.3.1). In order to get configuration from device click “Get CFG”
button. The controls will be frozen for a while and on the bottom you will see progress bar active.
Analogue actions should be done to send configuration to device. All profiles are saved and
loaded from device at once. Report will be written at the bottom of main view after action.
Possible reports:
•
Configuration Sent Successfully
• Configuration Send Error!
•
Configuration Received Successfully
• Configuration Receiving Error!
If you receive error report, retry your last action once again. In most cases this should fix the
problem. If you are still having this problem, please contact our support engineers
(support@ruptela.com)
5.4. FIRMWARE UPDATE
Configurator is also used to update firmware version of FM terminal type device. There is
“Send FW” button (on the middle left on the main view (Fig 5.4.1)), it opens dialogue window to
search for firmware file. Different device type has its own firmware file: FM-Eco3 – .efwe, FM-Pro3
– .efwp, FM-Tco3 – .efwt. User has to open device COM port, click “Send FW”, navigate to
appropriate folder, select file and click “Open” (Fig. 5.4.2).
Fig. 5.4.1. Firmware update button
FM Manual